The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. Therefore, this gives the PSF syringe filter a much improved throughput and flow rate.
PES Syringe Filter Intravenous OEM Bengal Corning Filtration Guide Syringe/Disc Filters The smaller conventional Corning® syringe disc-type filters (4, 15, 25, 26, and 28 mm diameter) are used with syringes which serves as both the fluid reservoir and the pressure source.
Syringe Filters PES (Polyethersulfone) Syringe Filters PES is hydrophilic and constructed from pure polyethersulfone polymer membrane for maximum sample recovery. Low protein and drug binding characteristics make it ideally suited for use in life sciences applications.
In stock 18 available Check Availablity Acrodisc® Syringe Filters with Supor® Membrane, Sterile - 0.8 µm, 13 mm (75/pkg) Product ID 4608 Unit of Measure 1/EA Min Order Qty 1 Pore Size 0.8 µm µm nominal Diameter (Metric) 13 mm Effective Filtration Area (Metric) 1 cm² Hold-Up Volume <60 µL Membrane Material Supor (Hydrophilic polyethersulfone)
PES Syringe Filters, 0.45 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF14501 Regular Price $125.51 Price $109.14 As low as $98.23 Add to Cart PES Syringe Filters, 0.45 um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF14498 Regular Price $78.49 Price $68.25 As low as $61.43 Add to Cart
Dec 20, 2021 · December 20, 2021. A recent article published in Hospital Pharmacy showed that 93 Intravenous (IV) drugs approved by the FDA between December 2011 and April 2019 require filtration with a syringe or in-line filter 1. Filtration of parenteral formulations (IV drugs) may be required either during preparation of the drug and/or during
Aijiren Captiva Premium PES syringe filters are evaluated and compared to other suppliers’ PES and PVDF syringe filters for the risk of losing protein during filtration. Captiva Premium PES syringe filters demonstrate low protein binding with excellent recovery for biological samples, especially for ‘sticky’ proteins at low concentrations.
PES syringe filters are used for filtration of samples in medical, analytical, molecular biology and biological system applications. The most prominent characteristic of PES syringe filters is their “soft” mechanical properties which are maintained even after repeated use. PES Membrane Roll Stock
Nov 24, 2021 · Yes. IV in-line filters are classified by their pore size, such as 0.2, 1.2, 5 microns (µm). The size designation gives the ability of the IV in-line filter to retain particles and organisms. The pore size required may be defined by the instructions for use of a drug or solution.
GVS PES Filtration Membrane is available in roll widths from 1 inch (2.54 cm) to 31 inches (78.7 cm), as well as in cut sheets and disks that can be customized to meet your application and size requirements. Features & Benefits. Low extractable ensure clean results; Low drug and protein binding maximize sample recovery;
These Corning® syringe filters have acrylic copolymer housings, female Luer lock inlets and male Luer slip outlets. Polyethersulfone (PES) membranes provide the fastest flow rates, low protein binding and low extractables 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
PES Syringe Filters PVDF Syringe Filters Order Products 24 Results of total products Availability In Stock (14) Product Use Sterile Filtration and Clarification (24) Industries Laboratory (24) Segments Sterile Filtration and Clarification (23) Venting and Gas Filtration (1) Applications Clarification and Prefiltration (23) Sterile Filtration (20)
Choice PES Syringe Filters Specifications. Membrane: HPLC certified; Maximum operating temperature: 100 °C; Housing: Medical grade, virgin polypropylene; Autoclave: Sterilize by dry heat at 121 °C for 15 minutes; Choice PES Syringe Filter Applications. IC sample preparation and analysis; Dissolution testing; Chemical Incompatibilities
PharmAssure Syringe Filters with Supor Membrane Single use Supor polyethersulfone membrane Maximum operating pressure: 75 psi (5.2 bar) Non-pyrogenic Sterile Minimal retention volumes: 50 µL for the 25 mm and < 100 µL for the 32 mm filter PharmAssure 25 mm Vent Filters 0.2 µm hydrophobic vent membrane Maximum operating pressure: 15 psi
Minisart ® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12. Type 16553 with a pore size of 0.1 µm can be used for sterile filtration and mycoplasma removal and has a male luer lock outlet. Version K is individually packed and sterilized by ethylene oxide (EO). Item no.: 16553----------K
