EZFlow® 13mm, 25mm, and 33mm sample prep syringe filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC.
Membrane: Nylon, Hydrophobic PVDF, Hydrophobic PTFE, Hydrophilic PTFE, PES, MCE Diameter: 4mm, 13mm, 25mm, 33mm Pore Size: 0.22μm, 0.45μm Maximum Operating Temperature:131℃ Maximum Operating Pressure: 6.0 bar@23℃ Nylon: aqueous and organic solutions Hydrophobic PVDF: Low protein binding, filtration for organic solvents
Syringe Filter Membrane Pore Size: 0.22um: Sterilization grade filter membrane, sometimes written as 0.2um, can remove very fine particles in samples and mobile phases; it can meet the requirements of 99.99% sterilization specified by GMP or Pharmacopoeia; 0.45μm: usually used for pretreatment to reduce the microbial load and filter out most
Millex-HP Syringe Filter Unit, 0.45 µm, polyethersulfone, 33 mm, gamma sterilized: Background Information: Sterile Millex filter units are available in a larger 33 mm housing with either MCE, PVDF or PES membranes. Faster flow rate: The larger filter surface area increases flow rate and throughput.
Syringe Driven Filter 1) membrane type: FCA, PVDF, PES, MCE, Nylon, PTFE; 2) diameter: 13mm, 25mm, 30mm; 3) pore size: 0.1, 0.22 and 0.45μm; 4) sterile or non-sterile Unit pc Packaging 1pc/blister; 100pcs/pkt, 1000pcs/ctn Qty/Ctn 1000pcs Filter Related products: JL03301 Disposable Infusion Set JL03302 Disposable Blood Transfusion Set JL03303 Disposable Pediatric Infusion Set J L03304
PES Membrane Clarification and Particulate Removal PES Membrane for HPLC PES Membrane Sterile PES Syringe Filter, 0.45μm, 25mm ... Filter Medium: PES: Diameter ...
1.HPLC Syringe Filter Inlet: Female Luer-Lok , Outlet: Male Luer Slip 2.Diameter (mm):13mm/25mm 3.Pore size: 0.22μm/0.45μm 4.Membrane: Nylon、Hydrophilic PVDF、Hydrophilic PTFE、 Hydrophobic PTFE、PES、MCE、Hydrophilic PP、 Cellulose Acetate Features: Can be used for the Service as follows but not only:1) Integrity Test 2) Chemical Compatibility Test 3) Extractables 4) Adsorption Test
200PCS Nylon Membrane Filter 0.22/0.45μm 47mm OD Hydrophilic Lab Filtration NEW GP Syringe Filters w/ PES 0.22µm Membrane, 13mm - Box of (85) ... This listing ...
The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes.
syringe filters combine premium quality and economy. PES syringe filters are made of PES membrane and a polypropylene overmold housing. Syringe Filter PES are available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes.
Labware. Laboratory equipment, glassware, and plasticware are essential for the success of any laboratory. Through our partnerships with brands you know and trust, we offer a wide selection of laboratory equipment and supplies to support more than 100 areas of interest. Balances. Cell Culture & Cryogenics.
HPLC Columns. Standard Series C8/C18 HPLC Columns; NH2 HPLC Columns; PES Syringe Filters; PP Syringe Filters; Cellulose Acetate Syringe Filters; Filter Membranes.
A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. Key Applications: Low Protein Binding; Sterilization of tissue culture media, protein solutions or aqueous solutions; Sterilization of drugs or aqueous solutions administered intravenously
HPLC Syringe Filters. 1.Syring Filter,Female Luer-Lok Inlet,Outlet: Male Luer Slip. 2.Diameter (mm):13mm/25mm. 3.Poresize:0.22μm/0.45μm. 4.Membrane: Nylon、Hydrophilic PVDF、Hydrophilic PTFE、Hydrophobic PTFE、PES、MCE、Hydrophilic PP、Cellulose Acetate. Send Inquiry Chat Now.
0.45 Filter found in: Captiva 0.45u Filter Start Kit, 0.45 Micron Filter, Captiva 96Well 0.45u Filter Pl 5/pk, FILTER 0.45 STD 10 BPURE (OP), Purple Nylon..