Wheel filter Syringe Filter with 0.22 0.45 micron PVDF Membrane for lab. Sterile or nonsterile Sheathing material: PP Pore size: 0.22μm, 0.45μm Diameter: 13mm, 25mm, 33mm Package: Individually Wrapped or 100pieces/bag or 200pieces/jar Color: Yellow, Blue, Green, Pink, White, Purple. There are two connecting forms: luer lock or luer slip.
The GD/X filter contains a unique prefiltration stack of 100% borosilicate glass. The prefilter will retain fine particles down to 0.7 μm, allowing difficult sample filtration with less hand force. The volume of the sample filtered is 3-7 times greater than an unprotected membrane. PP housing. Syringe filters can be autoclaved. Membranes:
33mm 0.22μm MCE Syringe Filter for Syringe Bengal-Aijiren . PTFE Syringe Filters, 0.10 um, 33mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF18086 Regular Price: $167.70 Price $145.83 PP/PTFE/Nylon Filters, Buy 0.22 0.45 Micron Syringe Filters Media material have Nylon, PTFE, Hydrophilic PTFE, PES, PVDF, MCE, CA, GF, PP, Active Carbon, in both sterile and non-sterile varieties, with GF or
EZFlow® 33mm Syringe Filter, .45μm Hydrophilic PTFE 100/pack These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing with a female Luer-lok inlet and a male Luer slip outlet. All materials comply with USP Class VI Standards.
Foxx Life Sciences EZFlow® Syringe Filter, .45μm Hydrophilic PTFE, 33mm, 100/pack EZFlow® 13mm, 25mm, and 33mm sample prep syringe filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC.
Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0μm pore sizes Sterile Millex filter units are available in a larger 33 mm housing with either MCE, PVDF or PES membranes.Faster flow rate:The larger filter surface area increases flow rate and throughput.
Thermo Scientific™ Target2™ PTFE Syringe Filters, 0.45μm, 30mm, with Pre-Filter Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust PTFE syringe filters.
33mm 0.45μm PVDF Syringe Filter Analysis Fast Shipping Millex™ Nonsterile 33mm Syringe Filters are constructed of polyethylene housing with Durapore™ membranes for preparing samples for analysis. Available in two pore sizes. Low-extractable polyethylene housing. Includes a 0.22 or 0.45µm membrane filter for fine filtration.
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. 0.45 um, 30 mm, with Pre-Filter, 100 Pk.
Millex-HV Syringe Filter Unit, 0.45 µm, PVDF, 13 mm. This item is a direct replacement for SLHV013SL in countries where restricted. Sterile Millex filter units are available in a larger 33 mm housing with either MCE, PVDF or PES membranes. The larger filter surface area increases flow rate and throughput. Syringe filter, PVDF, Ф13mm, 0.45μm
Sterile filtration, clarification, and particle removal. Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes.
The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane . 33mm 0.45μm PVDF Syringe Filter for Sample Preparation Chile. Sterile PVDF Syringe Filter, 0.45μm, 30mm - SFPVDF030045SL.
Hydrophilic PTFE Syringe Filters, 0.45μm, 33mm 100/pk. 0503-000084. $360.00 Hydrophobic PTFE Syringe Filters, 0.22μm, 33mm 100/pk. 0503-000182. $110.00. cat_labfil.pdf LABFIL syringe filters are for a wide range of applications.
Cytiva Whatman™ Uniflo Syringe Filters, 0.45μm, PVDF filtration media PVDF membranes are designed for high tensile strength, high solvent resistance, and low protein binding, making them suitable for biomedical filtration and HPLC sample preparation.
The GD/X filter contains a unique prefiltration stack of 100% borosilicate glass. The prefilter will retain fine particles down to 0.7 μm, allowing difficult sample filtration with less hand force. The volume of the sample filtered is 3-7 times greater than an unprotected membrane. PP housing. Syringe filters can be autoclaved. Membranes:
