マイレクス（Millex）-GV, 0.22 µm, PVDF, 33 mm, ガンマ線滅菌済 販売終了（後継品SLGVR33RS）. 背景情報. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods
FF2545 (0.45μm) Description: 13mm Nylon Syringe Filter 13mm Diameter Polypropylene Housing (Green color) 25mm Nylon Syringe Filter 25mm Diameter Polypropylene Housing (Green color) 13mm Hydrophilic PVDF Syringe Filter 13mm Diameter Polypropylene Housing (Blue color) 25mm Hydrophilic PVDF Syringe Filter 25mm Diameter Polypropylene Housing (Blue
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
Low hold-up volume helps you to recover virtually all of your sample after filtering Shop Fisherbrand™ Syringe Filters - Sterile at Fishersci.com FisherbrandSyringe Filters - Sterile PVDF; Sterile; Pore size: 0.45μm; | Fisher Scientific
Description. Aijiren disposable pvdf syringe filter devices are designed to provide clear filterate of aqueous and organic solutionsfrom small volumes up to 100 mL. PVDF syringe filters are made of hydrophilic PVDF membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes.
The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples. GXF - multi-layered glass fiber prefilter.
Maximum operating pressure for 25mm is 7Bar, recommended to use syringe sizes of 3mL or larger Pore Size of 0.20 µm optimal for sterile filtration or 0.45 µm optimal for thorough cleaning PVDF, Polyvinylideneflouride Characteristics:
PTFE membrane are hydrophobic in nature and are effective barriers to microbes and particulate matter. The high titer reduction and water intrusion pressure allow the membrane to repel high surface tension liquids while venting gases.
Homepage › Filtration › Sartorius Minisart RC25 Regenerated Cellulose Syringe Filters › 17765-Q syringe filter 25mm diameter Minisart RC25 0.45um pore size regenerated cellulose RC with male luer slip connector outlet (pack of 500)
Trace2 PVDF Membrane Syringe Filter, 25mm, 0.45μm, 100-pk. Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life.
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability. Merck Millipore Millex™ Filters: Inlet, Female Luer-Lok; Outlet, Male Luer Slip.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Nest syringe filters have pore size either 0.22μm or 0.45μm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL Retention volume <115µL Maximum operating temperature: 100°C autoclave at 125°C
Minisart ® Syringe Filters: The Easy Choice – Clean and Safe For sterilization of liquids, sterile filtration with Minisart ® syringe filters is the optimal solution. They remove all microorganisms and particles reliably, without any influence of their ingredients, due to adsorption or decomposition.
Our Syringe Filters are high quality, well packaged and sold at a fair competitive price. They are available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings.
