Easy Syringe provide a side open closure to introduce sample then the sample filtered through syringe filter with needle guide to precise into autosampler vial. Ordre Info: Choice of Syringe Size---10ml, 5ml, 2ml ( A, B, C )
25mm Filters - Standard size for Chromatography labs and our most popular size. Syringe Filters, 25mm, PTFE, 0.45um Pore Size. Yellow Polypropylene, AQ Brand. 100/PK.
The Membrane filters are available for 33mm syringe filters in 0.2μm and 0.45μm. The range of Membrane including all common membranes, such as Nylon, PTFE, PES, MCE, CA, PVDF, GF, RC etc. Features and Benefits Large filtration areas: High Sample Throughput More Firm connection: Luer Lock Male/Female
PTFE Syringe Filters are ready-to-use units for simple, rapid and reliable ultracleaning of small volume samples for the HPLC or GC analysis. They allow for reliable removal of microorganisms and particles from liquids, air and gasses. Typical applications are clarification, sterile filtration, sample preparation, sterile venting and medical.
Fisherbrand 09-719H 25mm Non-Sterile PTFE 0.45m Syringe Filters Box of 42 New Open Box in Excellent Physical Condition Have you been searching for Syringe Filte
The PerkinElemr Red PTFE (Hydrophobic) Syringe Filters, 0.45 μm, 25 mm (100/pack) have broad chemical compatibility and high pH resistance.
Our 25 mm syringe filters use the identical materials of construction as our entire capsule filter portfolio to ensure streamlined scaling without requalification or revalidation concerns. From our syringe filters with 4 cm 2 of surface area to our 50″ UltraCap ® H.D. filters with up to 3.6 m 2 of surface area, the only thing that changes as
Johnson Test Papers’ hydrophilic PTFE syringe filters use special hydrophilic PTFE membrane as the filter medium This material has maximum chemical and pH resistance and is visually clear when wet with water The PTFE-H syringe filter is a versatile filter for aqueous and aggressive organic solvent based solutions and especially ideal for HPLC operation
Welded Syringe Filter For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size:0.22μm and 0.45μm,Three types in filter size:13mm,25mm and 30mm. PTFE Hydrophilic P/N
Syringe Filters, PTFE, 25mm 25mm Tisch Scientific offers an extensive selection of proven, yet affordable syringe filters that are in stock and ready to ship today.
Qualisil Syringe filter are designed for efficient and cost effective rapid filteration of almost any solution prior to analysis, and are optimized for superior flow rates and high thoughout. Nylon Syringe Filters are supplied in 13mm id, 25mm id formats in virgin medical polypropylene housings.
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes
Material: Nylon, PES, Hydrophobic PTFE, Hydrophilic PTFE, Hydrophobic PVDF, Hydrophilic PVDF, MCE, CA, PP, RC,GF.. Pore size: 0.22μm / 0.45μm. Diameter: 13mm / 25mm
INTERCHIM UPTIDISC BIO MEC/GF 25MM 0.45UM PP HOUSING SYRINGE FILTERS. P/N : U54640 Pack : 1 x 100 U. P/N : U54640 Item : U54640 Pack : 1 x 100 U. Cat. Price :
Trace2 PTFE Membrane Syringe Filter, 25mm, 0.45μm, 100-pk. Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life. Available in sizes and membrane types to meet any application need, Ibis Scientific Trace2 Syringe
