25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media Glass Fiber / Supor® [hydrophilic polyethersulfone (PES)] membranes Hold-Up Volume <125 µL Housing Material Modified acrylic Maximum Operating Pressure (bar) 4.1 bar Maximum Operating Temperature (Metric) 55 °C Overview Description Type Use Reviews Documents Datasheets Download: English
0.45 μm pore size. non-sterile. PTFE membrane (hydrophilic) high-density polyethylene. high-density polyethylene housing. Replaced by SLCRX13NL, 0.45 µm pore size, 13 mm diameter, Millex-LCR hydrophilic PTFE membrane, non-sterile. Expand.
25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide.
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common
The 25 mm device, Acrodisc One™ syringe filter with wwPTFE membrane, sets the standard for HPLC/UHPLC analytical filtration. It can extend the life of a HPLC column by up to 52 times over unfiltered samples. Effects of filters on HPLC column life following injections of unfiltered and filtered 0.05% latex sphere suspensions.
Millex-HV Syringe Filter Unit, 0.45 µm, PVDF, 33 mm, gamma-sterilizable, sterilized, A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50. Millex-SV 5.0 µm, A 25 mm diameter sterile syringe filter with a 5 µm pore size hydrophilic PVDF membrane.
The GD/X filter contains a unique prefiltration stack of 100% borosilicate glass. The prefilter will retain fine particles down to 0.7 μm, allowing difficult sample filtration with less hand force. The volume of the sample filtered is 3-7 times greater than an unprotected membrane. PP housing.
25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media wwPTFE Hold-Up Volume <125 µL Housing Material Polypropylene GxF Maximum Operating Pressure (bar) 6.2 bar Maximum Operating Temperature (Metric) 55 °C Quantity 50 pkg Replacement for AP-4559 Typical Flow Rate 224 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews
MilliporeSigma SLAA025NK Millex® AA Syringe Filter with Mixed Cellulose Esters Membrane, 0.8µm, Diameter: 25mm, Green Outlet, Non-Sterile (Pack of 1000) MilliporeSigma SLFG025NB Millex® FG Syringe Filter with Hydrophobic PTFE Membrane, 0.2µm, Non-Sterile, Diameter: 25mm, Non-Sterile (Pack of 250) MilliporeSigma SLFG025NK Millex® FG Syringe
CHROMAFIL®Syringe Filters – Teflon (PTFE) Polytetrafluorethylene Hydrophobic membranes For nonpolar liquids and gases Extremely resistant towards all kinds of solvents as well as with strong acids or bases This membrane can be made more hydrophilic by first pre-wetting with alcohol followed by flushing with water Products Specifications
Find syringe filter 25mm 0.45 um and related products for scientific research at MilliporeSigma. 0.45 μm: 25 mm : PTFE membrane polypropylene housing: Expand. Hide.
IC Chromatography; Product Variants ABLUO Syringe Filter NON STERILE 25mm PTFE Hydrophilic, 0.45µm. ... ABLUO Syringe Filter NON STERILE 25mm PES, 0.45µm.
25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 510 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Reviews Documents Datasheets
Thermo Scientific™ Nalgene™ Sterile Syringe Filters Filter sample volumes of 10 to 100mL with these sterile syringe filters featuring a variety of membranes and pore sizes for most laboratory applications. Manufacturer: Thermo Scientific™ 7252545 View more versions of this product Catalog No. 09-740-114 $222.50 / Case of 50 Qty Check Availability
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing.
