Pore Size: 0.45um Diameter:13mm PVDF Syringe Filter Polypropylene Housing: Pore Size: 0.22um Diameter:25mm PVDF Syringe Filter Polypropylene Housing: Pore Size: 0.45um Diameter:25mm PVDF Syringe Filter Polypropylene Housing: 2. PTFE Syringe Filter Part No. FE1322: FE1345: FE2522: FF2545 Description: Pore Size: 0.22um Diameter:13mm PTFE Syringe
All Captiva premium syringe filters are shipped with an HPLC or LC/MS certificate that guarantees low levels of observed extractables. Excellent flow rates and maximum sample loading capacities. Every syringe filter is constructed with the highest-grade virgin polypropylene or MBS housing. Securely welded to prevent bursting and ensure sample
PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters 25 mm (21) Effective Filtration Area ...
Syringe Filters, Syrfi Syringe Filters, 25MM 0.45UM PTFE HYDROPHOBIC, 100/pk E-mail this product to a friend The PTFE (hydrophobic) membrane is recommended for elevated temperatures and most organic solvents, caustic, and acidic solutions.
TITAN2 30mm Syringe Filters - SUN SRiOrdering Guide: TITAN2 30mm Syringe Filters ; Titan2 Syringe Filter, CA, 0.45um, 30mm, Orange, 10000/CS, 44525-CB, $12,552.82
25mm filters are the most commonly used disposable syringe filter size in laboratories with a sample volume of 2.5 ml or more. For smaller sample sizes, 13mm or 4mm devices are recommended. These filters can be autoclaved for 0.5 hours at 121ºC, 0.1MPa or with ethylene oxide. Each case is supplied with a lot Certificate of Analysis.
Non-sterile Disposable Syringe Filter Syringe Filter PTFE for HPLC Syringe Filter Nylon for Laboratory Syringe Filter PVDF for Sale Sterile Syringe Filters Wholesale Syringe Filter MCE for Lab Use 0.22μm Pore Syringe Filters for Sale 25mm Syringe Filter for Sale 13mm Syringe Filters Wholesale 0.45μm Syringe Filtre Wholesale Price
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes
Features and benefits: Pigment-free polypropylene (polycarbonate for Puradisc 30 and Aqua 30. Standard inlet and outlet luer connector. Tube-tip format (optional) for accurate dispensing into a micro-vial. Choice of membrane or glass microfiber filter media. Choice of filter sizes (4 mm, 13 mm or 30 mm) to minimize sample loss.
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are. Related Products: 4 Mm Syringe Filter.
Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from blocking the flow path between the column packing.
0.45um Syringe filters are normally used in scientific research laboratories to remove certain sized particles or bacteria from certain volume of liquid or gas prior to analysis or cell culture. 0.45um Syringe filters are popularly used in HPLC analysis.
Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL
Available pore sizes are 0.22um and 0.45um. Available diameters are 13mm and 25mm. Compatible with nearly all solvents. High backpressure with aqueous solvents. The most universal filter. Single-layered membrane. Certified DNAse/RNAse free and non-pyrogenic. Quantity of 100 syringe filters per unit. Close ×.
Syringe Filter PTFE for HPLC - hplcvials.com. PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes.
